| CharCharacteristic | Unit | Limit | Category ISO-F | Test method Reference |
|||||||||
| RMA 30 |
RMB 30 |
RMD 30 |
RME 180 |
RMF 180 |
RMG 380 |
RMH 380 |
RMK 380 |
RMH 700 |
RMK 700 |
||||
| Density at 15 °C | Kg/m³ | max. | 960,0 | 975,0 | 980,0 | 991,0 | 991,0 | 1010,0 | 991,0 | 1010,0 | ISO 3675 or ISO12185 (see also 7.1) |
||
| Kinematic viscosity at 50 °C | mm²/s b | max. | 30,0 | 80,0 | 180,0 | 380,0 | 700,0 | ISO 3104 | |||||
| Flash point | °C | min. | 60 | 60 | 60 | 60 | 60 | ISO 2719 (see also 7.2) |
|||||
Pur Point (upper) - winter quality - summer quality |
°C | max. max. |
0 6 |
24 24 |
30 30 |
30 30 |
30 30 |
30 30 |
ISO 3016 ISO 3016 |
||||
| Carbon residue | % (m/m) | max. | 10 | 14 | 15 | 20 | 18 | 22 | 22 | ISO 10370 ISO 10370 | |||
| Ash | % (m/m) | max. | 0,10 | 0,10 | 0,10 | 0,15 | 0,15 | 0,15 | ISO 6245 | ||||
| Water | % (V/V) | max. | 0,5 | 0,5 | 0,5 | 0,5 | 0,5 | ISO 3733 | |||||
| Sulfur |
% (m/m) | max. | 3,50 | 4,00 | 4,50 | 4,50 | 4,50 | ISO 8754 or ISO 14596 ( see also 7.3 ) |
|||||
| Vanadium | mg/kg | min. | 150 | 350 | 200 | 500 | 300 | 600 | 600 | ISO 14597 or IP 501 or IP 470 (see 7.8 ) |
|||
| Total sediment potential | % (m/m) | max. max |
0,10 | 0,10 | 0,10 | 0,10 | 0,10 | ISO 10307-2 ( see 7.6 ) | |||||
| Aluminium plus silicon | mg/kg | max. | 80 | 80 | 80 | 80 | 80 | ISO 10478 or IP 501 or IP 470 (see 7.9 ) |
|||||
| Low sulfur | % (m/m) | max. | 1,50 | 1,50 | 1,50 | 1,50 | 1,50 | ISO 8754 or ISO 14596 ( see also 7.3 ) |
|||||